Search
Now showing items 1-10 of 10
Development of high-performance anode supported solid oxide fuel cell
(WILEY-BLACKWELL, 2012)
A high performance five-layered anode supported solid oxide fuel cell (SOFC) is developed by low-cost tape casting, co-sintering, and screen printing techniques. The cell is composed of NiO/scandium stabilized zirconia ...
Novel electrolytes for solid oxide fuel cells with improved mechanical properties
(PERGAMON-ELSEVIER SCIENCE LTD, 2012)
The improvement of the mechanical properties of novel structured electrolytes with triangular cut off geometry in the active region is presented by filleting the tips of triangles. The effect of fillet radius on the bending ...
Novel structured gadolinium doped ceria based electrolytes for intermediate temperature solid oxide fuel cells
(ELSEVIER SCIENCE BV, 2011)
Novel three-layered intermediate temperature solid oxide fuel cell (SOFC) electrolytes based on gadolinium doped ceria (GDC) are developed to suppress the electronic conductivity of GDC, to improve the mechanical properties ...
Effects of operating parameters on the performance of a high-pressure proton exchange membrane electrolyzer
(WILEY-BLACKWELL, 2013)
In this study, a 100-cm2 single-cell and a 10-cell stack PEM electrolyzers are designed and manufactured, and the effects of operating parameters such as temperature, pressure, and feed water flow rate on the performance ...
Development and testing of a highly efficient proton exchange membrane (PEM) electrolyzer stack
(PERGAMON-ELSEVIER SCIENCE LTD, 2011)
Integrated with the renewable energy resources such as wind and solar energy, a Proton Exchange Membrane (PEM) water electrolyzer is one of the important methods for hydrogen production due to its high efficiency, compact ...
Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)
The delamination and degradation of solid oxide fuel cells (SOFCs) electrode/electrolyte interface is estimated by calculating the stresses generated within the different layers of the cell. The stresses developed in a ...
Anode-supported solid oxide fuel cells with ion conductor infiltration
(WILEY-BLACKWELL, 2011)
Nano ion conductor infiltration to anode andcathode side of solid oxide fuel cell (SOFC) significantly improves the performance of an SOFC. The effects of processing parameters such as molar concentration, sintering ...
Application of a coating mixture for solid oxide fuel cell interconnects
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)
Due to high operating temperature (800-1000 degrees C) of SOFC's, limited number of alloys can be employed for the purpose of current collection. The electrical conductivity of these alloys usually decreases during the ...
Effects of electrolyte pattern on mechanical and electrochemical properties of solid oxide fuel cells
(ELSEVIER SCI LTD, 2012)
In order to enhance the electrochemical performance and reduce the operation temperature of a conventional electrolyte supported solid oxide fuel cell (SOFC), a three layered electrolyte with various geometry is designed ...
Novel structured electrolytes for solid oxide fuel cells
(ELSEVIER SCIENCE BV, 2012)
Novel grate type electrolytes are designed and fabricated to improve the cell performance and to lower the operation temperature of intermediate temperature electrolyte supported solid oxide fuel cells based on scandium ...
