Search
Now showing items 1-5 of 5
Variation of microindentation hardness with solidification and microstructure parameters in the Al based alloys
(ELSEVIER SCIENCE BV, 2008)
The Al based alloys (Al-3 wt%Si, Al-3 wt%Cu and Al-1 wt%Ti) were prepared using metals of 99.99% high purity in the vacuum atmosphere. These alloys were directionally solidified upward with a constant growth rate (V = 0.008 ...
Interfacial energy of solid In2Bi intermetallic phase in equilibrium with In-Bi eutectic liquid at 72 degrees C equilibrating temperature
(ELSEVIER SCIENCE INC, 2008)
A radial temperature gradient on the sample was established by heating from centre with a single heating wire and cooling the outside of sample at -10 degrees C with a heating/refrigerating circulating bath containing an ...
Effects of growth rate and temperature gradient on the microstructure parameters in the directionally solidified succinonitrile-7.5 wt.% carbon tetrabromide alloy
(ELSEVIER SCIENCE SA, 2008)
Succinonitrile (SCN)-7.5 wt.% carbon tetrabromide (CTB) alloy was unidirectionally solidified with a constant growth rate (V = 33 mu m/s) at five different temperature gradients (G = 4.1-7.6 K/mm) and with a constant ...
Determination of solid-liquid interfacial energies in the In-Bi-Sn ternary alloy
(IOP PUBLISHING LTD, 2008)
The equilibrated grain boundary groove shapes of solid In(2)Bi solution in equilibrium with the In-Bi-Sn eutectic liquid were observed from a quenched sample at 59 degrees C. The Gibbs-Thomson coefficient, solid-liquid ...
Dependency of Microstructural Parameters and Microindentation Hardness on the Temperature Gradient in the In-Bi-Sn Ternary Alloy with a Low Melting Point
(KOREAN INST METALS MATERIALS, 2008)
The ternary alloy In-21.5 at.% Bi-17.8 at.% Sn, which has a melting point of 60 degrees C, was directionally solidified upward with a constant growth rate (V = 3.2 mu m/s) and different temperature gradients (G = 0.91 K/mm ...
