Search

Now showing items 1-6 of 6

Investigation of directional solidified Al-Ti alloy

Kaya, H.; Cadirli, E.; Boyuk, U.; Marasli, N. (ELSEVIER SCIENCE BV, 2009)

Al-1 wt% Ti alloy was directionally solidified upwards under argon atmosphere under the two conditions; with different temperature gradients (G = 2.20-5.82 K/mm) at a constant growth rate (V = 8.30 mu m/s) and with different ...

Experimental determination of solid-solid and solid-liquid interfacial energies of solid epsilon (CuZn5) in the Zn-Cu alloy

Kaygisiz, Y.; Akbulut, S.; Ocak, Y.; Keslioglu, K.; Marasli, N.; Cadirli, E.; Kaya, H. (ELSEVIER SCIENCE SA, 2009)

The equilibrated grain boundary groove shapes of solid epsilon; (CuZn5) in equilibrium with Zn-1.75 at.% Cu peritectic liquid and solid epsilon (CuZn5) in equilibrium with solid Zn solution (Zn-2.83 at.% Cu) were observed ...

The effect of growth rate on microstructure and microindentation hardness in the In-Bi-Sn ternary alloy at low melting point

Cadirli, E.; Boyuk, U.; Kaya, H.; Marasli, N.; Keslioglu, K.; Akbulut, S.; Ocak, Y. (ELSEVIER SCIENCE SA, 2009)

In-21.5 at.% Bi-17.8 at.% Sn ternary alloy which has 333 K melting point was directionally solidified upward with a constant temperature gradient (G = 0.91 K/mm) in a wide range of growth rates (3.2-157.1 mu m/s) with a ...

Interfacial energies of solid CuAl2 in the CuAl2-Ag2Al pseudo binary alloy

Ocak, Y.; Aksoz, S.; Keslioglu, K.; Marasli, N.; Cadirli, E.; Kaya, H. (ELSEVIER SCIENCE SA, 2010)

Gibbs-Thomson coefficient, solid-liquid interfacial energy and grain boundary energy are important parameters for people doing comparisons between experimentally observed solidification morphology and predictions from ...

Determination of interfacial energies of solid Sn solution in the In-Bi-Sn ternary alloy

Akbulut, S.; Ocak, Y.; Marasli, N.; Keslioglu, K.; Kaya, H.; Cadirli, E. (ELSEVIER SCIENCE INC, 2009)

The equilibrated grain boundary groove shapes of solid Sn solution (Sn-40.14 at.% In-16.11 at.% Bi) in equilibrium with the In-Bi-Sn liquid (In-21.23 at.% Bi-19.04 at.% Sn) were observed from the quenched sample at 59 ...

Experimental investigation of the effect of solidification processing parameters on the rod spacings in the Sn-1.2 wt.% Cu alloy

Cadirli, E.; Boyuk, U.; Engin, S.; Kaya, H.; Marasli, N.; Ulgen, A. (ELSEVIER SCIENCE SA, 2009)

Sn-1.2 wt.% Cu alloy was prepared in a graphite crucible under the vacuum atmosphere. The samples were directionally solidified upwards under argon atmosphere with different temperature gradients (G = 2.69-8.88 K/mm) at a ...