Show simple item record

dc.contributor.authorZeqiri F.
dc.contributor.authorAlkan M.
dc.contributor.authorKaya B.
dc.contributor.authorToros S.
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2018
dc.identifier.issn1757-8981
dc.identifier.urihttps://dx.doi.org/10.1088/1757-899X/295/1/012011
dc.identifier.urihttps://hdl.handle.net/11480/1689
dc.descriptionPetroyag Lubricants;UCTEA Chamber of Mechanical Engineersen_US
dc.description9th International Conference on Tribology, Balkantrib 2017 -- 13 September 2017 through 15 September 2017 -- -- 135934en_US
dc.description.abstractIn this paper, the effects of cutting parameters on cutting forces and surface roughness based on Taguchi experimental design method are determined. Taguchi L9 orthogonal array is used to investigate the effects of machining parameters. Optimal cutting conditions are determined using the signal/noise (S/N) ratio which is calculated by average surface roughness and cutting force. Using results of analysis, effects of parameters on both average surface roughness and cutting forces are calculated on Minitab 17 using ANOVA method. The material that was investigated is Inconel 625 steel for two cases with heat treatment and without heat treatment. The predicted and calculated values with measurement are very close to each other. Confirmation test of results showed that the Taguchi method was very successful in the optimization of machining parameters for maximum surface roughness and cutting forces in the CNC turning process. © Published under licence by IOP Publishing Ltd.en_US
dc.language.isoengen_US
dc.publisherInstitute of Physics Publishingen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCutting forceen_US
dc.subjectInconel 625en_US
dc.subjectSurface roughnessen_US
dc.subjectTaguchi design of experimentsen_US
dc.subjectvibrations and temperatureen_US
dc.titleExperimental Research and Mathematical Modeling of Parameters Effecting on Cutting Force and SurfaceRoughness in CNC Turning Processen_US
dc.typeconferenceObjecten_US
dc.relation.journalIOP Conference Series: Materials Science and Engineeringen_US
dc.departmentNiğde ÖHÜen_US
dc.identifier.volume295en_US
dc.identifier.issue1en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthor[0-Belirlenecek]
dc.identifier.doi10.1088/1757-899X/295/1/012011


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record